You can contact us 24/7 0208 123 8733
3
Total
£4,599.00
Subtotal: £4,599.00
Your order qualifies for free shipping!
Free Shipping on All Orders Over ยฃ100
Sale £18.84 Original price was: £18.84.£17.00Current price is: £17.00. £169.00 Original price was: £169.00.£149.00Current price is: £149.00.
The best discounts this week
Power-Hub Price Drops Youโll Love
Krypton Pro Rechargeable Floodlight 500lm
CP 535RA 5 Channel Cable Wheelchair Ramp
3
Total
£4,599.00
Subtotal: £4,599.00
Your order qualifies for free shipping!
Free Shipping on All Orders Over ยฃ100
Category: Automotive & Garage Equipment โบ Battery Chargers & Startersร
ex. VAT inc. VAT
โข High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. โข Charge cycle has nine profiles designed to optimise the condition of the battery and the speed of the charge. โข Input Current: 2.4A. โข Output (12V/24V): 25A/12.5A. โข Battery Support Mode: 20A โ 13.5V. โข Designed for use with vehicle batteries including Calcium, Wet, Gel, AGM and VRLA types on 12V and 24V systems. โข Temperature sensor allows accurate charging of battery even when cold. โข Safety circuitry prevents sparks or polarity reversal. โข Once fully charged, battery may be left connected to be automatically conditioned and maintained. โข 2 Year Guarantee*.
โข Output: 800A (Peak), 400A (EN). โข Innovative patented technology with no internal battery so no need to wait hours for the unit to charge before use. โข Simple and safe to use with no long term battery storage issues. โข Can be fully energised in approximately two minutes. โข If the vehicle battery is faulty or is holding less than 5 volts the E/START800 can be pre-charged via another vehicle's battery, a Micro USB charging cable (not included) or the 12V accessory lead. โข Digital display indicates battery voltage, capacitor charge and faults. โข Can also be used as a 0.8A battery maintainer using a USB charging cable or a 2A battery charger with the addition of Model No. E/START2A Charging Adaptor. โข Compact and lightweight for easy handling and storage, yet still delivers the same result as heavy, bulky, lead acid battery equivalents. โข 2 Year guarantee*.
โข The Mode-3 charging cable simply plugs into any public or home EV charging point. โข Current: 16A. โข Voltage: 230V 1ph. โข Cable Length: 5m. โข Cable Specification: EN50620 - 3*2.5mmยฒ+2*0.5mmยฒ. โข IP54 Rated. โข Supplied with storage case.
โข The Mode-3 charging cable simply plugs into any public or home EV charging point. โข Current: 16A. โข Voltage: 230V 1ph. โข Cable Length: 5m. โข Cable Specification: EN 50620 - 3*2.5mmยฒ+2*0.5mmยฒ. โข IP54 Rated. โข Supplied with storage case.
โข Compact 6/12V dual bank battery charger perfect for automotive, motorcycle and marine workshops. โข Suitable for charging a variety of batteries, charger reacts continuously to battery condition and delivers whatever charge rate is required. โข Two bank charger outputting 2 x 5A depending on the condition and charge of each battery. โข Constantly regulated voltage patterns allow the battery to be recharged fully and safely without fear of overcharging. โข Compatible with all AGM, Gel and VRLA flooded batteries commonly found in everything from automotive and farm equipment to motorcycles, ATVs, golf buggies and lawnmowers. โข Supplied with SAE โquickโ connectors on leads and battery terminals eyelets.
โข Fuse 50Amp (Pack of 20). โข Application: SUPERBOOST140. โข 40mm x 10mm. โข Supplied in clear poly bag.
Designed for professional workshop, trade and maintenance tasks, the Tips for Lathe Turning Tool Set SM3025CS6 combines tips for lathe turning tool set Model No. SM3025CS6 and.
Designed for professional workshop, trade and maintenance tasks, the Revolving Centre MT3 combines high quality accessories for lathe metalworking and revolving Centre, giving.
The Moving Steady Rest is engineered for professional workshop, trade and maintenance tasks, pairing high quality accessories for Model No. SM3002 metalworking with follow Rest.
Metalworking Lathe 500mm Between Centres with Floor Stand [SM27COMBO]
£2,375.95
In stock
Brand: SealeyDesigned for professional workshop, trade and maintenance tasks, the Metalworking Lathe 500mm Between Centres with Floor Stand combines workshop lathe designed for a wide range.
The Lathe Dog for SM3002 is engineered for professional workshop, trade and maintenance tasks, pairing high quality accessories for Model No. SM3002 metalworking with reliable.
Designed for professional workshop, trade and maintenance tasks, the Independent Chuck with Back Plate 4-Jaw combines 4-Jaw independent chuck with back plate and 3-Stepped jaws.
A practical choice for professional workshop, trade and maintenance tasks, the Fixed Steady Rest offers high quality accessories for Model No. SM3002 metalworking alongside.
A practical choice for professional workshop, trade and maintenance tasks, the Cutter Set 8 x 8mm 5pc offers high quality accessories for SM3002 metalworking lathe alongside hSS.
The Cutter Set 5pc is engineered for professional workshop, trade and maintenance tasks, pairing high quality accessories for Model No. SM3002 metalworking with 8 x 8mm Section.
The Right-Hand Face Plate 150mm is engineered for professional workshop, trade and maintenance tasks, pairing one of a range of quality accessories for Model No's SM1308 with.
Designed for professional workshop, trade and maintenance tasks, the Revolving Centre MT2 combines high quality accessories for Model No. SM3002 metalworking and revolving Centre.
Designed for professional workshop, trade and maintenance tasks, the Mill Attachment combines high quality accessories for Model No. SM3002 metalworking and mill Attachment.
A practical choice for professional workshop, trade and maintenance tasks, the Live Centre MT3 offers high quality accessories for Model No. SM3002 metalworking alongside live.
A practical choice for professional workshop, trade and maintenance tasks, the Digital Feed Display offers digital display for the cross slide and the compound tool alongside.
Designed for professional workshop, trade and maintenance tasks, the Cutter Set 8 x 8mm 6pc combines high quality accessories for SM3002 metalworking lathe and hSS Steel lathe.
A practical choice for professional workshop, trade and maintenance tasks, the Wood Lathe 1000mm offers powered by 370W motor with no-volt load release switch which alongside.
A practical choice for professional workshop, trade and maintenance tasks, the T-Nut Bolt Set 12pc offers 12-Piece T-Nut bolt set. designed for all kinds of alongside.
Designed for professional workshop, trade and maintenance tasks, the Quick Change Post combines high quality accessories for Model No. SM3002 metalworking and quick Change Post.
A practical choice for professional workshop, trade and maintenance tasks, the Metalworking Mini Lathe 250mm offers bench mounting miniature lathe, small enough to fit into the.
The Metalworking Lathe 550mm Between Centres is engineered for professional workshop, trade and maintenance tasks, pairing workshop lathe designed for a wide range of turning and.
The Indexable Lathe Turning Tool Set 8mm 5pc is engineered for professional workshop, trade and maintenance tasks, pairing 8mm Shank 5-piece indexable turning tool set with.
Designed for professional workshop, trade and maintenance tasks, the Independent Chuck 4-Jaw combines high quality accessories for Model No. SM3002 metalworking and 4-Jaw.
Designed for professional workshop, trade and maintenance tasks, the Sealey Lathe Stand 800 x 355 x 880mm combines high quality accessories for metalworking lathe and stand for.
A practical choice for professional workshop, trade and maintenance tasks, the Cutter Set 8 x 8mm 11pc offers high quality accessories for Model No. SM3002 metalworking alongside.
The Tips for Lathe Turning Tool Set SM3025CS5 is engineered for professional workshop, trade and maintenance tasks, pairing tips for lathe turning tool set Model No. SM3025CS5.
Designed for professional workshop, trade and maintenance tasks, the Tips for Lathe Turning Tool Set SM3025CS2 combines tips for lathe turning tool set Model No. SM3025CS2 and.




























![Tips for Lathe Turning Tool Set SM3025CS6 [SM3025CS6R]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105744/SM3025CS6R__02790.1720562742.webp)
![Revolving Centre MT3 [SM27RDC]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104505/SM27RDC_DFC0951443__97168.1720581218.webp)


![Moving Steady Rest [SM3002FR]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105020/SM3002FR__39753.1720562738.webp)
![Metalworking Lathe 500mm Between Centres with Floor Stand [SM27COMBO]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104307/SM27COMBO_DFC1803466__63364.1738595104.webp)







![Lathe Dog for SM3002 [SM3002LD]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105131/SM3002LD__17696.1720562737.webp)
![Independent Chuck with Back Plate 4-Jaw [SM27FJC]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104416/SM27FJC_DFC1029568__22728.1720582766.webp)
![Fixed Steady Rest [SM3002SR]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105255/SM3002SR__52847.1720562741.webp)
![Cutter Set 8 x 8mm 5pc [SM3002CS5]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104914/SM3002CS5__74809.1720562738.webp)
![Cutter Set 5pc [SM3002CS2]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104856/SM3002CS2__88371.1720562727.webp)
![Right-Hand Face Plate 150mm [SM42/ACC6]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23120054/SM42-ACC6__38381.1720562775.webp)
![Revolving Centre MT2 [SM3002RC]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105223/SM3002RC__57440.1720562739.webp)
![Mill Attachment [SM3002MA]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105147/SM3002MA_DFC0851948__39119.1720579393.webp)
![Live Centre MT3 [SM3002SC]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105240/SM3002SC__20287.1720562737.webp)
![Digital Feed Display [SM3002DFD]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104951/SM3002DFD.V2_DFC76447__85839.1720567361.webp)

![Cutter Set 8 x 8mm 6pc [SM3002CS6]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104933/SM3002CS6__23748.1720562738.webp)
![Wood Lathe 1000mm [SM1308]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23102531/SM1308_DFC83422__31454.1720567431.png)

![T-Nut Bolt Set 12pc [SM27TNS]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104643/ProductDefault.webp)
![Quick Change Post [SM3002QCCR]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105205/SM3002QCCR__13090.1720562739.webp)
![Metalworking Mini Lathe 250mm [SM2503A]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23103708/SM2503A__14618.1720562716.webp)

![Metalworking Lathe 550mm Between Centres [SM27]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104212/SM27.V3_DFC1782192__14735.1737040808.webp)





![Indexable Lathe Turning Tool Set 8mm 5pc [SM3025CS2]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105449/SM3025CS2_DFC0928755__02128.1720580934.webp)

![Independent Chuck 4-Jaw [SM30024JC]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104819/SM30024JC__08004.1720562729.webp)
![Sealey Lathe Stand 800 x 355 x 880mm [SM3002ST]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105313/SM3002ST_DFC1782172__17149.1733916616.webp)
![Cutter Set 8 x 8mm 11pc [SM3002CS11]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23104838/SM3002CS11__90299.1720562727.webp)
![Tips for Lathe Turning Tool Set SM3025CS5 [SM3025CS5R]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105633/SM3025CS5R__20514.1720562741.webp)
![Tips for Lathe Turning Tool Set SM3025CS2 [SM3025CS2R]](https://powerhub-s3-london.s3.eu-west-2.amazonaws.com/media/2026/10/23105516/SM3025CS2R__95014.1720562740.webp)