You can contact us 24/7 0208 123 8733
1
Total
£1,533.00
Subtotal: £1,533.00
Your order qualifies for free shipping!
Free Shipping on All Orders Over ยฃ100
Sale £18.84 Original price was: £18.84.£17.00Current price is: £17.00. £169.00 Original price was: £169.00.£149.00Current price is: £149.00.
The best discounts this week
Power-Hub Price Drops Youโll Love
Krypton Pro Rechargeable Floodlight 500lm
CP 535RA 5 Channel Cable Wheelchair Ramp
1
Total
£1,533.00
Subtotal: £1,533.00
Your order qualifies for free shipping!
Free Shipping on All Orders Over ยฃ100
Category: Automotive & Garage Equipment โบ Battery Chargers & Startersร
ex. VAT inc. VAT
A height-adjustable steel tripod designed to elevate the Red Arrow Globe Light, improving light spread and coverage on site. Rated IK07 for impact resistance and backed by a 2-year warranty.
A spare USB charging cable for the Krypton Pro LED floodlight range.
An optional black decorative trim for the Taurus Site bulkhead range, fitted with a simple, secure clip fixing.
A replacement extra-deep red prismatic diffuser for retrofit onto the Taurus Site bulkhead range, for safety-marking applications.
A replacement extra-deep clear prismatic diffuser for retrofit onto the Taurus Site bulkhead range.
A height-adjustable steel tripod designed to pair with either the 600mm or 1200mm Weatherguard Site tripod head, for fast, flexible on-site lighting setups.
A 110V microwave motion sensor for integration into Red Arrow Weatherguard Site luminaires, rated IP20 with a 1-year warranty.
A magnetic mounting kit (set of 2) for the Weatherguard Site range, allowing quick, tool-free fixing to any magnetic surface with a 30kg break weight per magnet. Ideal for easy relocation on site.
110V 25W Emergency Battery Back up Pack c/w plug & coupler
£90.00
In stock
Brand: Red Arrow ElectricalA 25W emergency battery back-up pack for 110V site lighting circuits, providing 3 hours of back-up power in the event of a mains failure. Rated 16A and supplied pre-wired with a 110V plug and coupler in a yellow IP44 housing.
A 10-pack of Red Arrow sky hooks designed to keep connectable festoon kit cabling neat, tidy and safely suspended. Tool-free to install and made from high-strength yellow polycarbonate.
A 30cm splitter cable for Red Arrow connectable festoon kits, with 1 male to 2 female connectors, allowing a festoon run to be split into two branches on site.
A 3-piece set of empty ballast bags designed for the Red Arrow 360ยฐ Tower Light, each rated to a maximum weight of 14kg, used to weigh down and stabilise the tower during use.
An adjustable aluminium tripod stand made for the 360ยฐ Tower Light, raising the head to a working height of up to 3 metres. Lifting the light clear of the floor widens the throw and reduces glare at eye level, which suits open areas and part-built floors. Lightweight to carry between positions and quick to set up.
โข High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. โข Charge cycle has nine profiles designed to optimise the condition of the battery and the speed of the charge. โข Input Current: 2.4A. โข Output (12V/24V): 25A/12.5A. โข Battery Support Mode: 20A โ 13.5V. โข Designed for use with vehicle batteries including Calcium, Wet, Gel, AGM and VRLA types on 12V and 24V systems. โข Temperature sensor allows accurate charging of battery even when cold. โข Safety circuitry prevents sparks or polarity reversal. โข Once fully charged, battery may be left connected to be automatically conditioned and maintained. โข 2 Year Guarantee*.
โข Output: 800A (Peak), 400A (EN). โข Innovative patented technology with no internal battery so no need to wait hours for the unit to charge before use. โข Simple and safe to use with no long term battery storage issues. โข Can be fully energised in approximately two minutes. โข If the vehicle battery is faulty or is holding less than 5 volts the E/START800 can be pre-charged via another vehicle's battery, a Micro USB charging cable (not included) or the 12V accessory lead. โข Digital display indicates battery voltage, capacitor charge and faults. โข Can also be used as a 0.8A battery maintainer using a USB charging cable or a 2A battery charger with the addition of Model No. E/START2A Charging Adaptor. โข Compact and lightweight for easy handling and storage, yet still delivers the same result as heavy, bulky, lead acid battery equivalents. โข 2 Year guarantee*.
โข The Mode-3 charging cable simply plugs into any public or home EV charging point. โข Current: 16A. โข Voltage: 230V 1ph. โข Cable Length: 5m. โข Cable Specification: EN50620 - 3*2.5mmยฒ+2*0.5mmยฒ. โข IP54 Rated. โข Supplied with storage case.
โข The Mode-3 charging cable simply plugs into any public or home EV charging point. โข Current: 16A. โข Voltage: 230V 1ph. โข Cable Length: 5m. โข Cable Specification: EN 50620 - 3*2.5mmยฒ+2*0.5mmยฒ. โข IP54 Rated. โข Supplied with storage case.
โข Compact 6/12V dual bank battery charger perfect for automotive, motorcycle and marine workshops. โข Suitable for charging a variety of batteries, charger reacts continuously to battery condition and delivers whatever charge rate is required. โข Two bank charger outputting 2 x 5A depending on the condition and charge of each battery. โข Constantly regulated voltage patterns allow the battery to be recharged fully and safely without fear of overcharging. โข Compatible with all AGM, Gel and VRLA flooded batteries commonly found in everything from automotive and farm equipment to motorcycles, ATVs, golf buggies and lawnmowers. โข Supplied with SAE โquickโ connectors on leads and battery terminals eyelets.
โข Fuse 50Amp (Pack of 20). โข Application: SUPERBOOST140. โข 40mm x 10mm. โข Supplied in clear poly bag.
LEDJ 6 x 3m Stand Set Replacement Bag. Replacement bag for LEDJ 6 x 3m Stand set. Dimensions : 1650 x 260 x 208 Weight: 1.4kg Designed for dependable performance, straightforward operation.
A universal 1500mm T-bar with a 35mm socket designed for use with most lighting stands including the Equinox STAN91 and STAN93. The 50mmร round horizontal bar allows for either standard lighting.
A universal truss bridge adaptor designed for use with most lighting stands featuring 35mm male upright including the Equinox STAN91 and STAN93. The adaptor accepts truss from 115-310mm in width.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 50mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 38mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Goliath Studio Daisy Wheel and Nut to allow use of 28mm spigots on Goliath Basic Series. Goliath Studio Daisy Wheel and Nut to allow use of 28mm spigots on Goliath Basic Series.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 35mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 32mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 25mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Goliath Studio R4500/R5200 250mm Replacement Handle. Goliath Studio R4500/R5200 250mm Replacement Handle Designed for dependable performance, straightforward operation and professional results.
Goliath Studio Replacement PRO Series 35mm Male to Male Adaptor complete with one locking pin. Goliath Studio Replacement PRO Series 35mm Male to Male Adaptor complete with one locking pin.
Goliath Studio adjustable truss support to accept 35mm diameter truss up to 250mm width Designed for dependable performance, straightforward operation and professional results in demanding.
The PSAโ03 is a high-quality Alicraftโclamp truss adaptor tailored for the VMB TE series towerlifts with a 50 mm insertion sleeve. Featuring tilting tilting grips it delivers secure and flexible.




































































