You can contact us 24/7 0208 123 8733
Sale £18.84 Original price was: £18.84.£17.00Current price is: £17.00. £169.00 Original price was: £169.00.£149.00Current price is: £149.00.
The best discounts this week
Power-Hub Price Drops Youโll Love
Krypton Pro Rechargeable Floodlight 500lm
CP 535RA 5 Channel Cable Wheelchair Ramp
Category: Hand Tools โบ Toolingร
ex. VAT inc. VAT
A height-adjustable steel tripod designed to elevate the Red Arrow Globe Light, improving light spread and coverage on site. Rated IK07 for impact resistance and backed by a 2-year warranty.
A spare USB charging cable for the Krypton Pro LED floodlight range.
An optional black decorative trim for the Taurus Site bulkhead range, fitted with a simple, secure clip fixing.
A replacement extra-deep red prismatic diffuser for retrofit onto the Taurus Site bulkhead range, for safety-marking applications.
A replacement extra-deep clear prismatic diffuser for retrofit onto the Taurus Site bulkhead range.
A height-adjustable steel tripod designed to pair with either the 600mm or 1200mm Weatherguard Site tripod head, for fast, flexible on-site lighting setups.
A 110V microwave motion sensor for integration into Red Arrow Weatherguard Site luminaires, rated IP20 with a 1-year warranty.
A magnetic mounting kit (set of 2) for the Weatherguard Site range, allowing quick, tool-free fixing to any magnetic surface with a 30kg break weight per magnet. Ideal for easy relocation on site.
110V 25W Emergency Battery Back up Pack c/w plug & coupler
£90.00
In stock
Brand: Red Arrow ElectricalA 25W emergency battery back-up pack for 110V site lighting circuits, providing 3 hours of back-up power in the event of a mains failure. Rated 16A and supplied pre-wired with a 110V plug and coupler in a yellow IP44 housing.
A 10-pack of Red Arrow sky hooks designed to keep connectable festoon kit cabling neat, tidy and safely suspended. Tool-free to install and made from high-strength yellow polycarbonate.
A 30cm splitter cable for Red Arrow connectable festoon kits, with 1 male to 2 female connectors, allowing a festoon run to be split into two branches on site.
A 3-piece set of empty ballast bags designed for the Red Arrow 360ยฐ Tower Light, each rated to a maximum weight of 14kg, used to weigh down and stabilise the tower during use.
An adjustable aluminium tripod stand made for the 360ยฐ Tower Light, raising the head to a working height of up to 3 metres. Lifting the light clear of the floor widens the throw and reduces glare at eye level, which suits open areas and part-built floors. Lightweight to carry between positions and quick to set up.
Tensioning Tool for Loop End Wire Twist Ties. Tensioning tool for fastening loop-end wire twist ties quickly.
Self Adjusting Wire Cutter & Stripper to Suit Wire from 0.2mm to 4mmยฒ. Self-adjusting tool for cutting and stripping copper and aluminium wire.
Automatic wire stripper with a spring-loaded handle for producing consistently stripped wire ends.
Wire Stripper for 0.5-2.0mmยฒ Wire. Automatic wire stripper with a spring-loaded handle for producing consistently stripped wire ends.
Cable Cutter for Cables up to 60mmยฒ. Cable cutter for copper and aluminium wire, with the cutting capacity listed below.
Cable Cutter for Cables up to 38mmยฒ. Cable cutter for copper and aluminium wire, with the cutting capacity listed below.
Cable Cutter for Cables up to 22mmยฒ. Cable cutter for copper and aluminium wire, with the cutting capacity listed below.
Ratchet Crimping Tool For Red Blue & Yellow Pre-Insulated Crimp Terminals
£39.02
In stock
Brand: C TieRatchet Crimping Tool For Red Blue & Yellow Pre-Insulated Crimp Terminals. Ratchet crimping tool with an ergonomic design.
Ratchet Crimping Tool For Red & Blue Flag Terminals. Ratchet crimping tool with an ergonomic design.
Ratchet crimping tool with an ergonomic design.
Ratchet Crimping Tool For Single, Dual Entry & Uninsulated Cord End Terminals 4.0-16mmยฒ. Ratchet crimping tool with an ergonomic design.
Ratchet Crimping Tool For Single, Dual Entry & Uninsulated Cord End Terminals 0.5-4mmยฒ. Ratchet crimping tool with an ergonomic design.
Iroda Micro-Therm Flameless Heat Gun. Compact Iroda Micro-Therm flameless heat gun for precision heat shrink work.
Iroda Micro-Jet Torch with Adjustable Flame. Compact Iroda Micro-Jet torch with adjustable flame control for repairs, crafts and electrical work.
Draper 1800W Electric Heat Gun. Corded Draper electric heat gun for applying heat shrink tubing and softening adhesives.
Ratchet Hand Crimping Tool For Copper Tube Terminals 2.5-16mmยฒ. Ratchet crimping tool for copper tube terminals.
Copper tube terminal crimping tool with an ergonomic handle for comfortable operation.
Budget Crimping, Cutting & Wire Stripping Multi-Tool. Budget multi-tool for crimping terminals and stripping wire.
Hexagonal Crimping Tool for Copper Tube Terminals 25-150mmยฒ. Crimping tool for copper tube terminals, designed to produce a hexagonal crimp.
Hexagonal Crimping Tool for Copper Tube Terminals 10-120mmยฒ. Crimping tool for copper tube terminals, designed to produce a hexagonal crimp.
Manual Cable Tie Installation Tool to Suit Stainless Steel Cable Ties up to 12.7 mm Width. Manual cable tie tensioning and cutting tool.
Premium Automatic Cable Tie Installation Tool to Suit Nylon Cable Ties up to 4.8 mm Width. Automatic cable tie tensioning and cutting tool.
Stainless Steel Banding Tensioning Tool to Suit Banding from 4.9mm-19mm Width. Tensioning and cutting tool for stainless steel banding.
Stainless Steel Banding Tensioning Tool to Suit Banding from 8mm-19mm Width. Tensioning and cutting tool for stainless steel banding.
Automatic Cable Tie Installation Tool to Suit Nylon Cable Ties up to 13mm Width.
Manual cable tie tensioning and cutting tool.
Automatic Cable Tie Installation Tool to Suit Nylon Cable Ties up to 4.8mm Width. Automatic cable tie tensioning and cutting tool.
Automatic Wire Stripper, Cutter & Crimper to suit 0.2-6mmยฒ Wire. Prepare wires for crimping with this automatic wire stripper.
Intertool Die For Cord End Terminals 6.0-16mmยฒ. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
Intertool Die For Cord End Terminals 0.5-4mmยฒ. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
Intertool Die For Open Barrel Terminals 0.5-6mmยฒ. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
Intertool Die For Non Insulated Terminals 1.5-10mmยฒ. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
Intertool Die For Red, Blue & Yellow heat shrink Terminals. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
Intertool Die For Red & Blue Flag Terminals. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
Intertool Die For Red, Blue & Yellow heat shrink Butt Connectors. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
Intertool Die For Red, Blue & Yellow Pre-Insulated Crimp Terminals. Interchangeable crimping die for use with the compatible blank ratchet crimping tool.
CMX Professional Series Blank Intertool to Suit Intertool Dies. Blank ratchet crimping tool for use with compatible interchangeable dies.
LEDJ 6 x 3m Stand Set Replacement Bag. Replacement bag for LEDJ 6 x 3m Stand set. Dimensions : 1650 x 260 x 208 Weight: 1.4kg Designed for dependable performance, straightforward operation.
A universal 1500mm T-bar with a 35mm socket designed for use with most lighting stands including the Equinox STAN91 and STAN93. The 50mmร round horizontal bar allows for either standard lighting.
A universal truss bridge adaptor designed for use with most lighting stands featuring 35mm male upright including the Equinox STAN91 and STAN93. The adaptor accepts truss from 115-310mm in width.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 50mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 38mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Goliath Studio Daisy Wheel and Nut to allow use of 28mm spigots on Goliath Basic Series. Goliath Studio Daisy Wheel and Nut to allow use of 28mm spigots on Goliath Basic Series.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 35mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 32mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Top cap suitable for use with most lighting stands T-bars single fixtures and other attachments. 25mm internal stand fitment Rugged machined aluminium construction Supplied with M10 bolt spring.
Goliath Studio R4500/R5200 250mm Replacement Handle. Goliath Studio R4500/R5200 250mm Replacement Handle Designed for dependable performance, straightforward operation and professional results.
Goliath Studio Replacement PRO Series 35mm Male to Male Adaptor complete with one locking pin. Goliath Studio Replacement PRO Series 35mm Male to Male Adaptor complete with one locking pin.
Goliath Studio adjustable truss support to accept 35mm diameter truss up to 250mm width Designed for dependable performance, straightforward operation and professional results in demanding.
The PSAโ03 is a high-quality Alicraftโclamp truss adaptor tailored for the VMB TE series towerlifts with a 50 mm insertion sleeve. Featuring tilting tilting grips it delivers secure and flexible.
Designed for use with the VMB TE-074 telescopic lifter this truss adaptor is fitted with alicraft truss clamps and will work with most truss with 48-50mm chords and widths from 30-40cm including.
Filter Products
Filter by Brands
Filter by price
Filter by Color
- Black (4)
- Black/Blue (4)
- Blue (2)
- Blue/Orange (1)
- Blue/Silver (1)
- Green/Silver (1)
- Red (2)
- Red/Black (3)
- Red/Blue (2)
- Red/Blue/Yellow (4)
- Red/Silver (1)
- Silver (4)
- Yellow (2)
- Yellow/Black (2)

















































































































